首页 > 产品中心 > 重组蛋白 > 免疫检查点

Human CD130/IL6ST Recombinant Protein (C-Fc) (HW398011)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HW398011
品牌abinScience
描述
Recombinant Human CD130/IL6ST Protein, C-Fc (HW398011) expressed in Mammalian Cells, spanning Met1-Ile618. Purity: >90% by SDS-PAGE.
Highlights
  • Fc Fusion — Enhanced stability with Protein A/G purification compatibility.
  • Mammalian Expression — Proper folding and native glycosylation.
  • High Purity — >90% purity verified by SDS-PAGE.
表达系统Mammalian cells
Accession号P40189
蛋白长度Met1-Ile618
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
预测分子量96.70 kDa
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名IL-6 receptor subunit beta, CDw130, IL-6R-beta, Membrane glycoprotein 130, CD130, Oncostatin-M receptor subunit alpha, Interleukin-6 signal transducer, IL-6RB, IL-6R subunit beta, IL6ST, Interleukin-6 receptor subunit beta, gp130
背景

Interleukin-6 receptor subunit beta (CD130/IL6ST) is a ~103 kDa protein. Signal-transducing molecule. The receptor systems for IL6, LIF, OSM, CNTF, IL11, CTF1 and BSF3 can utilize IL6ST for initiating signal transmission. Binding of IL6 to IL6R induces IL6ST homodimerization and formation of a high-affinity receptor complex, which activates the intracellular JAK-MAPK and JAK-STAT3 signaling pathways. That causes phosphorylation of IL6ST tyrosine residues which in turn activates STAT3. In parallel, the IL6 signaling pathway induces the expression of two cytokine receptor signaling inhibitors, SOCS1 and SOCS3, which inhibit JAK and terminate the activity of the IL6 signaling pathway as a negative feedback loop.

1. Hibi, M. et al. (1990) Cell 63, 1149-57. PMID: 2261637
2. Waetzig, GH. et al. (2010) The Journal of biological chemistry 285, 1781-9. PMID: 19915009
3. Schütt, A. et al. (2013) The Biochemical journal 450, 487-96. PMID: 23294003
4. Taniguchi, K. et al. (2015) Nature 519, 57-62. PMID: 25731159
5. Hashimoto, Y. et al. (2009) Molecular biology of the cell 20, 2864-73. PMID: 19386761
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human CD130/IL6ST Protein, C-Fc

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐