首页 > 产品中心 > 重组蛋白 > 细胞因子

Human CX3CL1/Fractalkine Recombinant Protein (N-His) (HX143012)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HX143012
品牌abinScience
描述
Recombinant Human CX3CL1/Fractalkine Protein, N-His (HX143012) expressed in E. coli, spanning Asp90-Gln245. Purity: >90% by SDS-PAGE.
Highlights
  • His-Tagged — N-terminal 6×His tag for IMAC purification.
  • E. coli Expression — High-yield, cost-effective production.
  • High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号P78423
蛋白长度Asp90-Gln245
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
预测分子量18.12 kDa
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 0.02% NLS, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Small-inducible cytokine D1, Fractalkine, Neurotactin, C-X3-C motif chemokine 1, NTT, CX3CL1, SCYD1, FKN, CX3C membrane-anchored chemokine
背景

Fractalkine (CX3CL1) is a ~42 kDa protein. Chemokine that acts as a ligand for both CX3CR1 and integrins ITGAV:ITGB3 and ITGA4:ITGB1. The CX3CR1-CX3CL1 signaling exerts distinct functions in different tissue compartments, such as immune response, inflammation, cell adhesion and chemotaxis. Regulates leukocyte adhesion and migration processes at the endothelium. Can activate integrins in both a CX3CR1-dependent and CX3CR1-independent manner. In the presence of CX3CR1, activates integrins by binding to the classical ligand-binding site (site 1) in integrins.

1. Nishimura, M. et al. (2002) Journal of immunology (Baltimore, Md. : 1950) 168, 6173-80. PMID: 12055230
2. Xue, X. et al. (2011) PLoS pathogens 7, e1002162. PMID: 21829356
3. Fujita, M. et al. (2012) Journal of immunology (Baltimore, Md. : 1950) 189, 5809-19. PMID: 23125415
4. Fong, AM. et al. (1998) The Journal of experimental medicine 188, 1413-9. PMID: 9782118
5. Mizoue, LS. et al. (1999) Biochemistry 38, 1402-14. PMID: 9931005
6. Bazan, JF. et al. (1997) Nature 385, 640-4. PMID: 9024663
7. Pan, Y. et al. (1997) Nature 387, 611-7. PMID: 9177350
8. Fujita, M. et al. (2014) PloS one 9, e96372. PMID: 24789099
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human CX3CL1/Fractalkine Protein, N-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐