首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human FOXO3 Recombinant Protein (N-His) (HT094012)

通知 · 产品HT094012已停产。
价格: --
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HT094012
品牌abinScience
描述
Recombinant Human FOXO3 Protein, N-His (HT094012) expressed in E. coli, spanning Met372-Gly673. Purity: >90% by SDS-PAGE.
Highlights
  • ●His-Tagged — N-terminal 6×His tag for IMAC purification.
  • ●E. coli Expression — High-yield, cost-effective production.
  • ●High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号O43524
蛋白长度Met372-Gly673
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Remove endotoxin and sterilization is required for cell assay.
纯度>90% as determined by SDS-PAGE.
预测分子量34.31 kDa
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 0.02% NLS, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Forkhead in rhabdomyosarcoma-like 1, AF6q21 protein, Forkhead box protein O3, FOXO3, FKHRL1, FOXO3A
背景

Forkhead box protein O3 (FOXO3) is a ~71 kDa protein. Transcriptional activator that recognizes and binds to the DNA sequence 5'-[AG]TAAA[TC]A-3' and regulates different processes, such as apoptosis and autophagy. Acts as a positive regulator of autophagy in skeletal muscle: in starved cells, enters the nucleus following dephosphorylation and binds the promoters of autophagy genes, such as GABARAP1L, MAP1LC3B and ATG12, thereby activating their expression, resulting in proteolysis of skeletal muscle proteins. Triggers apoptosis in the absence of survival factors, including neuronal cell death upon oxidative stress. Participates in post-transcriptional regulation of MYC: following phosphorylation by MAPKAPK5, promotes induction of miR-34b and miR-34c expression, 2 post-transcriptional regulators of MYC that bind to the 3'UTR of MYC transcript and prevent its translation. In response to metabolic stress, translocates into the mitochondria where it promotes mtDNA transcription.

1. Brunet, A. et al. (1999) Cell 96, 857-68. PMID: 10102273
2. Lehtinen, MK. et al. (2006) Cell 125, 987-1001. PMID: 16751106
3. Kress, TR. et al. (2011) Molecular cell 41, 445-57. PMID: 21329882
4. Becher, J. et al. (2018) Developmental cell 47, 592-607.e6. PMID: 30513302
5. Peserico, A. et al. (2013) Cellular and molecular life sciences : CMLS 70, 2015-29. PMID: 23283301
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human FOXO3 Protein, N-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐