首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human SF3B1 Recombinant Protein (N-His) (HF609012)

价格: --
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HF609012
品牌abinScience
描述
Recombinant Human SF3B1 Protein, N-His (HF609012) expressed in E. coli, spanning Leu1038-Leu1304. Purity: >90% by SDS-PAGE.
Highlights
  • ●His-Tagged — N-terminal 6×His tag for IMAC purification.
  • ●E. coli Expression — High-yield, cost-effective production.
  • ●High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号O75533
蛋白长度Leu1038-Leu1304
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Remove endotoxin and sterilization is required for cell assay.
纯度>90% as determined by SDS-PAGE.
预测分子量32.72 kDa
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 0.02% NLS, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名SAP 155, SAP155, SF3B1, Pre-mRNA-splicing factor SF3b 155 kDa subunit, Splicing factor 3B subunit 1, Spliceosome-associated protein 155, SF3b155
背景

Splicing factor 3B subunit 1 (SF3B1) is a ~145 kDa protein. Component of the 17S U2 SnRNP complex of the spliceosome, a large ribonucleoprotein complex that removes introns from transcribed pre-mRNAs. The 17S U2 SnRNP complex (1) directly participates in early spliceosome assembly and (2) mediates recognition of the intron branch site during pre-mRNA splicing by promoting the selection of the pre-mRNA branch-site adenosine, the nucleophile for the first step of splicing. Within the 17S U2 SnRNP complex, SF3B1 is part of the SF3B subcomplex, which is required for 'A' complex assembly formed by the stable binding of U2 snRNP to the branchpoint sequence in pre-mRNA. Sequence independent binding of SF3A and SF3B subcomplexes upstream of the branch site is essential, it may anchor U2 snRNP to the pre-mRNA. May also be involved in the assembly of the 'E' complex.

1. Will, CL. et al. (2002) The EMBO journal 21, 4978-88. PMID: 12234937
2. Cretu, C. et al. (2016) Molecular cell 64, 307-319. PMID: 27720643
3. Zhang, Z. et al. (2020) Nature 583, 310-313. PMID: 32494006
4. Tholen, J. et al. (2022) Science (New York, N.Y.) 375, 50-57. PMID: 34822310
5. Hluchý, M. et al. (2022) Nature 609, 829-834. PMID: 36104565
6. Das, R. et al. (2000) Molecular cell 5, 779-87. PMID: 10882114
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human SF3B1 Protein, N-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐