首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human ACTB/β-actin/Beta Actin Recombinant Protein (N-His) (HX034012)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HX034012
品牌abinScience
描述
Recombinant Human ACTB/β-actin/Beta Actin Protein, N-His (HX034012) expressed in E. coli, spanning Met1-Phe375. Purity: >90% by SDS-PAGE.
Highlights
  • His-Tagged — N-terminal 6×His tag for IMAC purification.
  • E. coli Expression — High-yield, cost-effective production.
  • High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号P60709
蛋白长度Met1-Phe375
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 0.02% NLS, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Beta-actin, ACTB, Actin, cytoplasmic 1
背景

Actin, cytoplasmic 1 (ACTB/β-actin) is a ~41 kDa protein. Actin is a highly conserved protein that polymerizes to produce filaments that form cross-linked networks in the cytoplasm of cells. Actin exists in both monomeric (G-actin) and polymeric (F-actin) forms, both forms playing key functions, such as cell motility and contraction. In addition to their role in the cytoplasmic cytoskeleton, G- and F-actin also localize in the nucleus, and regulate gene transcription and motility and repair of damaged DNA. Plays a role in the assembly of the gamma-tubulin ring complex (gTuRC), which regulates the minus-end nucleation of alpha-beta tubulin heterodimers that grow into microtubule protafilaments. Part of the ACTR1A/ACTB filament around which the dynactin complex is built.

_x005F_x005F_x000D_ _x005F_x005F_x000D_
1. Hundt, N. et al. (2014) The FEBS journal 281, 5279-91. PMID: 25255767
_x005F_x005F_x000D_ _x005F_x005F_x000D_
2. Drazic, A. et al. (2018) Proceedings of the National Academy of Sciences of the United States of America 115, 4399-4404. PMID: 29581253
_x005F_x005F_x000D_ _x005F_x005F_x000D_
3. Schrank, BR. et al. (2018) Nature 559, 61-66. PMID: 29925947
_x005F_x005F_x000D_ _x005F_x005F_x000D_
4. Serna, M. et al. (2024) Developmental cell 59, 3175-3188.e8. PMID: 39321809
_x005F_x005F_x000D_ _x005F_x005F_x000D_
5. Aher, A. et al. (2024) Nature structural & molecular biology 31, 1124-1133. PMID: 38609661
_x005F_x005F_x000D_
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human ACTB/β-actin/Beta Actin Protein, N-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐