首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human TMPRSS2 Recombinant Protein (N-Fc) (HT176011)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HT176011
品牌abinScience
描述
Recombinant Human TMPRSS2 Protein, N-Fc (HT176011) expressed in Mammalian Cells, spanning Trp106-Arg255. Purity: >90% by SDS-PAGE.
Highlights
  • Fc Fusion — Enhanced stability with Protein A/G purification compatibility.
  • Mammalian Expression — Proper folding and native glycosylation.
  • High Purity — >90% purity verified by SDS-PAGE.
表达系统Mammalian cells
Accession号O15393
蛋白长度Trp106-Arg255
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Serine protease 10, PRSS10, TMPRSS2, Transmembrane protease serine 2
背景

Transmembrane protease serine 2 (TMPRSS2) is a ~53 kDa protein. Plasma membrane-anchored serine protease that cleaves at arginine residues. Participates in proteolytic cascades of relevance for the normal physiologic function of the prostate. Androgen-induced TMPRSS2 activates several substrates that include pro-hepatocyte growth factor/HGF, the protease activated receptor-2/F2RL1 or matriptase/ST14 leading to extracellular matrix disruption and metastasis of prostate cancer cells. In addition, activates trigeminal neurons and contribute to both spontaneous pain and mechanical allodynia.

_x005F_x005F_x000D_ _x005F_x005F_x000D_
1. Bestle, D. et al. (2020) Life science alliance 3. PMID: 32703818
_x005F_x005F_x000D_ _x005F_x005F_x000D_
2. Fraser, BJ. et al. (2022) Nature chemical biology 18, 963-971. PMID: 35676539
_x005F_x005F_x000D_ _x005F_x005F_x000D_
3. Wang, H. et al. (2023) Nature communications 14, 7574. PMID: 37990007
_x005F_x005F_x000D_ _x005F_x005F_x000D_
4. McCallum, M. et al. (2024) Cell 187, 4231-4245.e13. PMID: 38964328
_x005F_x005F_x000D_ _x005F_x005F_x000D_
5. Lucas, JM. et al. (2014) Cancer discovery 4, 1310-25. PMID: 25122198
_x005F_x005F_x000D_ _x005F_x005F_x000D_
6. Wilson, S. et al. (2005) The Biochemical journal 388, 967-72. PMID: 15537383
_x005F_x005F_x000D_ _x005F_x005F_x000D_
7. Ko, CJ. et al. (2015) Cancer research 75, 2949-60. PMID: 26018085
_x005F_x005F_x000D_
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human TMPRSS2 Protein, N-Fc

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐