首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human MUL1 Recombinant Protein (N-His) (HP112012)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HP112012
品牌abinScience
描述
Recombinant Human MUL1 Protein, N-His (HP112012) expressed in E. coli, spanning Lys44-Gln224. Purity: >90% by SDS-PAGE.
Highlights
  • His-Tagged — N-terminal 6×His tag for IMAC purification.
  • E. coli Expression — High-yield, cost-effective production.
  • High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号Q969V5
蛋白长度Lys44-Gln224
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
预测分子量22.57 kDa
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 0.02% NLS, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Mitochondrial-anchored protein ligase, E3 ubiquitin-protein ligase MUL1, Protein Hades, C1orf166, RNF218, Mitochondrial ubiquitin ligase activator of NFKB 1, Growth inhibition and death E3 ligase, MUL1, RING finger protein 218, MAPL, RING-type E3 ubiquitin transferase NFKB 1, Putative NF-kappa-B-activating protein 266, GIDE, MULAN, E3 SUMO-protein ligase MUL1
背景

Mitochondrial ubiquitin ligase activator of NFKB 1 (MUL1) is a ~39 kDa protein. Exhibits weak E3 ubiquitin-protein ligase activity. E3 ubiquitin ligases accept ubiquitin from an E2 ubiquitin-conjugating enzyme in the form of a thioester and then directly transfer the ubiquitin to targeted substrates. Can ubiquitinate AKT1 preferentially at 'Lys-284' involving 'Lys-48'-linked polyubiquitination and seems to be involved in regulation of Akt signaling by targeting phosphorylated Akt to proteasomal degradation. Mediates polyubiquitination of cytoplasmic TP53 at 'Lys-24' which targets TP53 for proteasomal degradation, thus reducing TP53 levels in the cytoplasm and mitochondrion. Proposed to preferentially act as a SUMO E3 ligase at physiological concentrations.

1. Zhang, B. et al. (2008) Cell research 18, 900-10. PMID: 18591963
2. Braschi, E. et al. (2009) EMBO reports 10, 748-54. PMID: 19407830
3. Bae, S. et al. (2012) Cell research 22, 873-85. PMID: 22410793
4. Jung, JH. et al. (2011) Cell death and differentiation 18, 1865-75. PMID: 21597459
5. Neuspiel, M. et al. (2008) Current biology : CB 18, 102-8. PMID: 18207745
7. Yun, J. et al. (2014) eLife 3, e01958. PMID: 24898855
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human MUL1 Protein, N-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐