首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human SDCBP Recombinant Protein (N-His) (HT180012)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HT180012
品牌abinScience
描述
Recombinant Human SDCBP Protein, N-His (HT180012) expressed in E. coli, spanning Ser2-Val298. Purity: >90% by SDS-PAGE.
Highlights
  • His-Tagged — N-terminal 6×His tag for IMAC purification.
  • E. coli Expression — High-yield, cost-effective production.
  • High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号O00560
蛋白长度Ser2-Val298
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 0.02% NLS, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Pro-TGF-alpha cytoplasmic domain-interacting protein 18, Melanoma differentiation-associated protein 9, SYCL, SDCBP, MDA9, MDA-9, Syntenin-1, Syndecan-binding protein 1, TACIP18, Scaffold protein Pbp1
背景

Syntenin-1 (SDCBP) is a ~32 kDa protein. Multifunctional adapter protein involved in diverse array of functions including trafficking of transmembrane proteins, neuro and immunomodulation, exosome biogenesis, and tumorigenesis. Positively regulates TGFB1-mediated SMAD2/3 activation and TGFB1-induced epithelial-to-mesenchymal transition (EMT) and cell migration in various cell types. May increase TGFB1 signaling by enhancing cell-surface expression of TGFR1 by preventing the interaction between TGFR1 and CAV1 and subsequent CAV1-dependent internalization and degradation of TGFR1. In concert with SDC1/4 and PDCD6IP, regulates exosome biogenesis. Regulates migration, growth, proliferation, and cell cycle progression in a variety of cancer types.

1. Philley, JV. et al. (2016) Journal of cellular physiology 231, 545-50. PMID: 26291527
2. Hwangbo, C. et al. (2016) Oncogene 35, 389-401. PMID: 25893292
3. Baietti, MF. et al. (2012) Nature cell biology 14, 677-85. PMID: 22660413
4. Kashyap, R. et al. (2015) Frontiers in pharmacology 6, 241. PMID: 26539120
5. Geijsen, N. et al. (2001) Science (New York, N.Y.) 293, 1136-8. PMID: 11498591
6. Zimmermann, P. et al. (2001) Molecular biology of the cell 12, 339-50. PMID: 11179419
7. Fernández-Larrea, J. et al. (1999) Molecular cell 3, 423-33. PMID: 10230395
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human SDCBP Protein, N-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐