首页 > 产品中心 > 重组蛋白 > 免疫检查点

Mouse PD-L1 Recombinant Protein (C-His) (MV974011)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号MV974011
品牌abinScience
描述
Recombinant Mouse CD274/PD-L1/B7-H1 Protein, C-His (MV974011) expressed in Mammalian Cells, spanning Met1-His239. Purity: >90% by SDS-PAGE.
Highlights
  • His-Tagged — N-terminal 6×His tag for IMAC purification.
  • Mammalian Expression — Proper folding and native glycosylation.
  • High Purity — >90% purity verified by SDS-PAGE.
表达系统Mammalian cells
Accession号Q9EP73
蛋白长度Met1-His239
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Mus musculus (Mouse)
性质Recombinant
经测试应用WB
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Programmed cell death 1 ligand 1, PD-L1, PDCD1 ligand 1, Programmed death ligand 1, B7 homolog 1, B7-H1, CD274, Cd274, B7h1, Pdcd1l1, Pdcd1lg1, Pdl1
背景

Programmed cell death 1 ligand 1 (CD274/PD-L1) is a ~32 kDa protein. Plays a critical role in induction and maintenance of immune tolerance to self. As a ligand for the inhibitory receptor PDCD1/PD-1, modulates the activation threshold of T-cells and limits T-cell effector response. Through a yet unknown activating receptor, may costimulate T-cell subsets that predominantly produce interleukin-10 (IL10). CD274 is the therapeutic target of atezolizumab (Tecentriq) and durvalumab (Imfinzi).

_x005F_x005F_x000D_ _x005F_x005F_x000D_
1. Tamura, H. et al. (2001) Blood 97, 1809-16. PMID: 11238124
_x005F_x005F_x000D_ _x005F_x005F_x000D_
2. Freeman, GJ. et al. (2000) The Journal of experimental medicine 192, 1027-34. PMID: 11015443
_x005F_x005F_x000D_ _x005F_x005F_x000D_
3. Wang, S. et al. (2003) The Journal of experimental medicine 197, 1083-91. PMID: 12719480
_x005F_x005F_x000D_
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Mouse CD274/PD-L1/B7-H1 Protein, C-His

  • Bioactivity

    Detects Mouse CD274/PD-L1/B7-H1 in indirect ELISAs.

  • Western blot

    Detected by Anti-CD274/PD-L1/B7-H1 monoclonal antibody (Catalog No: HB769023)

  • Bioactivity

    Detected by anti-mouse PDL1 antibody (Catalog No: MV974040) in indirect ELISA

  • Bioactivity

    Detected by Iv0226 (Catalog No: MB651030) in indirect ELISA.

  • Bioactivity

    Detected by C3 (Catalog No: MV974033) in indirect ELISA.

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐