首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human POLR3D Recombinant Protein (N-His) (HY534012)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HY534012
品牌abinScience
描述
Recombinant Human POLR3D Protein, N-His (HY534012) expressed in E. coli, spanning Val249-Arg398. Purity: >90% by SDS-PAGE.
Highlights
  • ●His-Tagged — N-terminal 6×His tag for IMAC purification.
  • ●E. coli Expression — High-yield, cost-effective production.
  • ●High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号P05423
蛋白长度Val249-Arg398
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
预测分子量18.75 kDa
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 0.02% NLS, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名DNA-directed RNA polymerase III subunit RPC4, RNA polymerase III subunit C4, DNA-directed RNA polymerase III subunit D, Protein BN51, RNA polymerase III 47 kDa subunit, RPC53 homolog, POLR3D, BN51, BN51T
背景

DNA-directed RNA polymerase III subunit RPC4 (POLR3D) is a ~44 kDa protein. DNA-dependent RNA polymerase catalyzes the transcription of DNA into RNA using the four ribonucleoside triphosphates as substrates. Specific peripheric component of RNA polymerase III (Pol III) which synthesizes small non-coding RNAs including 5S rRNA, snRNAs, tRNAs and miRNAs from at least 500 distinct genomic loci. Assembles with POLR3E/RPC5 forming a subcomplex that binds the Pol III core. Enables recruitment of Pol III at transcription initiation site and drives transcription initiation from both type 2 and type 3 DNA promoters. Required for efficient transcription termination and reinitiation.

1. Hu, P. et al. (2002) Molecular and cellular biology 22, 8044-55. PMID: 12391170
2. Canella, D. et al. (2010) Genome research 20, 710-21. PMID: 20413673
3. Girbig, M. et al. (2021) Nature structural & molecular biology 28, 210-219. PMID: 33558764
4. Hou, H. et al. (2021) Nature communications 12, 6135. PMID: 34675218
5. Van Bortle, K. et al. (2022) Nature communications 13, 3007. PMID: 35637192
6. Ablasser, A. et al. (2009) Nature immunology 10, 1065-72. PMID: 19609254
7. Chiu, YH. et al. (2009) Cell 138, 576-91. PMID: 19631370
NoteFor research use only.
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human POLR3D Protein, N-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐