首页 > 产品中心 > 重组蛋白 > 其他蛋白

Human SLC10A2 Recombinant Protein (N-GST & C-His) (HC032012)

价格:
规格:
  • 50ug
  • 100ug
  • 1mg
数量:
  • 概述

  • 图片

  • 参考文献

  • 产品说明书

概述
货号HC032012
品牌abinScience
描述
Recombinant Human SLC10A2 Protein, N-GST & C-His (HC032012) expressed in E. coli. Purity: >90% by SDS-PAGE.
Highlights
  • ●His-Tagged — N-terminal 6×His tag for IMAC purification.
  • ●E. coli Expression — High-yield, cost-effective production.
  • ●High Purity — >90% purity verified by SDS-PAGE.
表达系统E. coli
Accession号Q12908
蛋白长度Asn2-Asn28&Gly104-Ser126&Arg246-Asn284&Gly306-Lys348
应用ELISA, Immunogen, SDS-PAGE, WB, Bioactivity testing in progress
种属Homo sapiens (Human)
性质Recombinant
内毒素水平Please contact with the lab for this information.
纯度>90% as determined by SDS-PAGE.
预测分子量42.95 kDa
状态Lyophilized
保存溶液 Lyophilized from a solution in PBS pH 7.4, 1 mM EDTA, 4% Trehalose, 1% Mannitol.

Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.

重悬Reconstitute in sterile water for a stock solution. Adjust the volume of sterile water so that, after reconstitution, the final stock concentration matches the value indicated on the product label or datasheet.

RECONSTITUTION PROTOCOL
1. Allow the product to be reconstituted and the reconstitution diluent to reach room temperature.
2. Tap or briefly centrifuge the product vial before opening to dislodge any lyophilized material that may be dispersed on the wall or cap of the vial.
3. Use the diluent and stock concentration recommended in the product datasheet. If preparing a stock concentration higher than recommended, contact Technical Service.
4. After adding the diluent, re-cap the vial and invert gently by hand or place on a slow rocking platform to allow the reconstitution diluent to coat all the surfaces inside the vial. Note: Do not mix by vortexing or by pipetting the material up and down.
5. Allow the vial to sit at room temperature with gentle agitation for at least 15 minutes before aliquotting or using.
6. Store the reconstituted material in single use aliquots in polypropylene or siliconized tubes. Aliquots of 10 μL or larger are recommended.
运输In general, proteins are provided as lyophilized powder/frozen liquid. They are shipped out with dry ice/blue ice unless customers require otherwise.
稳定性和存储Use a manual defrost freezer and avoid repeated freeze thaw cycles. Store at 2 to 8°C for frequent use. Store at -20 to -80°C for twelve months from the date of receipt.
别名Ileal sodium/bile acid cotransporter; Apical sodium-dependent bile acid transporter; ASBT; Ileal Na(+)/bile acid cotransporter; Ileal sodium-dependent bile acid transporter; IBAT; ISBT; Na(+)-dependent ileal bile acid transporter; Sodium/taurocholate cotransporting polypeptide, ileal; Solute carrier family 10 member 2; SLC10A2; ASBT; ISBT; NTCP2
背景

Ileal sodium/bile acid cotransporter is a ~37 kDa protein. Plays a critical role in the sodium-dependent reabsorption of bile acids from the lumen of the small intestine. Transports various bile acids, unconjugated or conjugated, such as cholate and taurocholate. Also responsible for bile acid transport in the renal proximal tubules, a salvage mechanism that helps conserve bile acids (Probable). Works collaboratively with the Na(+)-taurocholate cotransporting polypeptide (NTCP), the organic solute transporter (OST), and the bile salt export pump (BSEP), to ensure efficacious biological recycling of bile acids during enterohepatic circulation.

1. Wong, MH. et al. (1995) The Journal of biological chemistry 270, 27228-34. PMID: 7592981
2. Craddock, AL. et al. (1998) The American journal of physiology 274, G157-69. PMID: 9458785
3. Weinman, SA. et al. (1998) The Journal of biological chemistry 273, 34691-5. PMID: 9856990
4. Kunst, RF. et al. (2021) Hepatology (Baltimore, Md.) 73, 2577-2585. PMID: 33222321
NoteFor research use only
图片
  • SDS-PAGE

    SDS-PAGE for Recombinant Human SLC10A2 Protein, N-GST & C-His

参考文献
公式
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
填写 质量、浓度、体积中的任意 2 项 + 分子量,自动计算未知值。
质量
=
浓度
×
体积
分子量 *
g/mol
公式
C₁ × V₁ = C₂ × V₂
填写 4 项中的任意 3 项,自动计算未知值。
母液
C₁ (起始浓度)
×
V₁ (起始体积)
=
工作液
C₂ (终浓度)
×
V₂ (终体积)

相关产品推荐